Steel the safe solution quiz

Please answer the following 10 multiple choice questions, then click 'submit' to check the result. The pass mark for a CPD certificate is 8 out of 10, and you may retake the quiz as many times as you wish, but the questions will vary! Please note that one, two, three or all of the possible answers presented for each question may be right, and to gain a mark for that question all correct answers must be identified.

Good luck

Steel the safe solution

When should steel erectors be allowed to climb on to the steelwork?

Never
Any time that an experienced erector decides
Only after a suitable method has been established in advance
Only whilst two safety lanyards are both attached, one to a MEWP and one to the steelwork

Which two of the following are the necessary steps in getting a site task done safely?

Reporting back to company head office on progress
Setting out what is involved in the task in hand
Completing each task as quickly as possible to reduce the time at risk
Identifying who is to undertake the task

Which one of the following would be beyond the scope of competence to be expected of a typical steelwork contractor?

Erection on a city centre site
Drilling concrete
Using bonding adhesives
Erection on a contoured site

What is the commonly used term for a mobile elevating work platform (MEWP)?

Flying carpet
Rubber duck
Cherry picker
Baby boomer

Which three of these steps available to the designer can contribute towards making steel the safe solution?

Use of computers to model the erection sequence
Use of Eurocodes
Use of connection types that are standard wherever possible
Use of off-site prefabrication as far as practicable

Which are the three main hazards that occur during steel erection?

Moving large heavy components into position
The part-erected structure can be unstable
Erection is done on sites that are difficult to reach
Each project is different

How does BCSA provide information on the competence of its member companies?

In terms of categories of steelwork
In terms of the recommended maximum size of contracts to be resourced
In terms of the identities of each company’s directors
In terms of numbers of HSE prosecutions

During frame design which three of the following issues will need resolving that affect the development of the design basis outline method of erection?

The stability concept for the part-erected structure including any requirements for temporary bracing or propping
Experience from any trial erection undertaken
Timing and method of grouting foundation connections
Use of profiled steel sheeting to provide lateral restraint

Which two of these steps available during execution can most contribute towards making steel the safe solution?

Use of trial erection
Use of new cranes
Use of scaffolding
Use of the part-erected steelwork to gain access to subsequent working positions

When erecting a single storey building which is the type of crane that would most generally be used?

Tower crane
Mobile telescopic crane
Crawler crane
Gantry crane